CKKJY - BATTERY ELECTROLYTE
- MSDS: CKKJY
- Manufacturer: EXIDE CORP
- Product Name: BATTERY ELECTROLYTE
- National Stock Number: 6140-01-446-9498
Product Identification
Product ID:BATTERY ELECTROLYTE
MSDS Date:04/01/1996
FSC:6140
NIIN:01-446-9498
Status Code:A
Kit Part:Y
MSDS Number: CKKJY
Responsible Party
READING, PA 19612-4205
US
Emergency Phone: 610-378-0500
Info Phone: 610-378-0500/0798
Cage: 20038
Contractor
Telephone: 319-927-4501/FAX 319-927-5701
Cage: 0RML3
Ingredients
SULFURIC ACID
CAS: 7664-93-9
RTECS: WS5600000
OSHA PEL 1 MG/M3
ACGIH TLV: 1 MG/M3
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: BURNS, SEVERE IRRITATION OF
SKIN, EYES, MOUTH, THROAT, ESOPHAGUS AND STOMACH; INFLAMMATION OF
BRONCHIAL MEMBRANES. CHRONIC: EROSION OF TEETH; INFLAMMATION OF
NOSE, THROAT AND BRONCHIAL TUBES.
Explanation of Carcinogenicity:IARC HAS CLASSIFIED "STRONG INORGANIC
ACID MIST CONTAINING SULFURIC ACID" AS A CATEGORY I CARCINOGEN, A
SUBSTANCE THAT IS CARCINOGENIC TO HUMANS. THIS CLASSIFICATION DOES
NOT APPLY TO LIQUID FORMS OF SULFURIC ACID OR SULFURIC ACID
SOLUTIONS CONTAINED WITHIN A LEAD-ACID BATTERY.
Effects of Overexposure:COUGH, INCREASED RESPIRATORY RATE; STINGING,
BURNING SENSATION ON SKIN, EYE IRRITATION; DISCOLORATION OF TEETH.
Medical Cond Aggravated by Exposure:EXPOSURE TO MIST MAY CAUSE LUNG
DAMAGE AND AGGRAVATE PULMONARY CONDITIONS.
First Aid
First Aid:REMOVE FROM EXPOSURE. FLUSH SKIN AND EYES FOR 15 MINUTES
WITH LARGE AMOUNTS OF COOL WATER. IF INGESTED, DO NOT INDUCE
VOMITING. CONSULT PHYSICIAN.
Fire Fighting
Extinguishing Media:DRY CHEMICAL; CARBON DIOXIDE; WATER FOG; WATER
Fire Fighting Procedures:WATER APPLIED TO SULFURIC ACID GENERATES HEAT
AND CAUSES ACID TO SPATTER. WEAR FULL-COVER SULFURIC ACID
RESISTANT CLOTHING.
Unusual Fire/Explosion Hazard:REACTS VIOLENTLY WITH METALS, NITRATES,
CHLORATES, CARBIDES AND OTHER ORGANIC MATERIAL, REACTS WITH MOST
METALS TO YIELD EXPLOSIVE/FLAMMABLE HYDROGEN GAS.
Accidental Release
Spill Release Procedures:STOP FLOW OF MATERIAL. FOR SMALL SPILLS,
NEUTRALIZE WITH SODA ASH, LIME, OR SODIUM BICARBONATE. DILUTE
CAUTIOUSLY WITH WATER. WEAR ACID-RESISTANT PROTECTIVE CLOTHING AND
EQUIPMENT.
Neutralizing Agent:NEUTRALIZE WITH SODA ASH, LIME, OR SODIUM
BICARBONATE.
Handling
Handling and Storage Precautions:STORAGE/HANDLING AREAS SHOULD BE
EQUIPPED WITH EYEWASHES/SAFETY SHOWERS. HANDLE CAUTIOUSLY; AVOID
CONTACT WITH SKIN AND EYES.
Other Precautions:HANDLING/STORAGE AREAS SHOULD BE EQUIPPED WITH PROPER
CONTAINMENT TO CAPTURE AND NEUTRALIZE SPILLS.
Exposure Controls
Respiratory Protection:NOT NORMALLY REQUIRED. IF CONCENTRATIONS EXCEED
PEL, USE NIOSH-APPROVED FULL FACE RESPIRATOR.
Ventilation:LOCAL EXHAUST: 150PPM SPECIAL; ACID-RESISTANT VENTILATION
COMPONENTS. MECHANICAL(GENERAL): 3-4 AIR CHANGES PER HOUR
Protective Gloves:RUBBER/PLASTIC WITH ELBOW LENGTH GAUNTLET.
Eye Protection:CHEMICAL GOGGLES; SAFETY GLASSES/FACE SHIELD
Other Protective Equipment:ACID-RESISTANT APRON, BOOTS
Work Hygienic Practices:HANDLE CAUTIOUSLY; AVOID CONTACT WITH SKIN AND
EYES.
Supplemental Safety and Health
Chemical Properties
HCC:C1
Boiling Pt:=95.C, 203.F
Vapor Pres:10(MM HG)@18F
Vapor Density:>1(AIR=1)
Spec Gravity:1.245-1.295 (H20=1)@60F
Evaporation Rate & Reference:<1(BUTYL ACETATE=1)
Solubility in Water:100%
Appearance and Odor:CLEAR LIQUID WITH SHARP, PENETRATING, PUNGENT ODOR
Stability
Stability Indicator/Materials to Avoid:YES
CONTACT WITH METALS MAY PRODUCE TOXIC SULFUR DIOXIDE FUMES, HYDROGEN
GAS.
Stability Condition to Avoid:CONTACT WITH ORGANIC MATERIALS,
COMBUSTIBLES, STRONG REDUCING AGENTS METALS, STRONG OXIDIZERS,
WATER.
Hazardous Decomposition Products:SULFUR TRIOXIDE, CARBON MONOXIDE,
SULFURIC ACID FUMES, SULFUR DIOXIDE.
Disposal
Waste Disposal Methods:PLACE NEUTRALIZED SLURRY IN SEALED CONTAINERS
AND DISPOSE OF AS HAZARDOUS WASTE, AS APPLICABLE. LARGE
WATER-DILUTED SPILLS, AFTER NEUTRALIZATION AND TESTING, SHOULD BE
MANAGED IN ACCORDANCE WITH LOCA L, STATE, AND FEDERAL REQUIREMENTS.
CONSULT STATE ENVIRONMENTAL AGENCY AND/OR FEDERAL EPA.
Transport
Transport Information:US DOT: BATTERY GLUID, ACID, HAZ CLASS 8, UN
2796, PG II, CORROSIVE LABEL.
Regulatory
SARA Title III Information:REPORTABLE QUANTITY FOR SPILLED 100%
SULFURIC ACID IS 1,000 LBS. SULFURIC ACID IS A LISTED "EXTREMELY
HAZARDOUS SUBSTANCE" UNDER EPCRA, WITH A THRESHOLD PLANNING
QUANTITY OF 1,000 LBS. EPCRA SECTION 302 NOTIFICATION IS REQUIRED
IF 1,000 LBS OR MORE OF SULFURIC ACID IS PRESENT AT ONE SITE.
BATTERY ELECTROLYTE CONTAINS 30-40% SULFURIC ACID. CONTACT YOUR
EXIDE REPRESENTATIVE FOR ADDITIONAL INFORMATI ON. SUPPLIER
NOTIFICATION: THIS PRODUCT CONTAINS TOXIC CHEMICALS WHICH MAY BE
REPORTABLE UNDER EPCRA SECTION 313 TOXIC CHEMICAL RELEASE INVENTORY
(FORM R) REQUIREMENTS.
Federal Regulatory Information:INGREDIENTS INTHE BATTERY ELECTROLYTE
ARE LISTED IN THE TSCA REGISTRY AS FOLLOWS: SULFURIC ACID, CAS#
7664-93-9.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.